Dear participants!

We created new applications named as "CurieMarieDock 0.2.0 long tasks" and "CurieMarieDock 0.2.0 short tasks", both based on CmDock 0.2.0 release. Algorithm of both applications are identical, but for "short tasks" we created only ARM-version and we plan to generate a special, smaller in 5 times tasks that covers one of part of entire tasks set. We advice all owners of small single-board computers like Raspberry Pi, to switch to "short tasks" application.

In next 1 .. 2 days we continue to generate new tasks "Sprot_delta_v1" (extended run) for both application, but later we issue a sample tasks set for new target (# 22) and only for "long application" because all task of sample set will be large. Simultaneously, project will continue to send Sprot_delta_v1 tasks for "short" application. And then we will proceed to sent long and short tasks for appropriate applications.

Hope that this explanation makes situation is clear.

Thank you for participation and donation of CPU time!

Hi there!
I use BOINC to run your project on iOS 11.7.2 . Wondering if you good give me some clarity on how to do the above, and switch to short tasks?

Hello Kyra! Our project simply doesn't have an application for Macintosh or iPhone...

Hello,

Good news but I have a problem with the tasks on my Raspberry Pi 2, according to my account, I have 3 tasks in progress, but in BOINC Manager, I have none...
(Application : CurieMarieDock 0.2.0 short tasks v2.00 arm-unknown-linux-gnueabihf)

There are no errors in the event log.

Do you have an idea how to solve this problem ?

Hi!

Would you perform a "Update project"? If tasks were lost, then they should be sent again. If nothing changed, would you post results of command

boinccmd --get_tasks | grep "WU name"

?

Thank you!

Yes I do a update project but it's same.

dim. 15 janv. 2023 11:11:58 | SiDock@home | Requesting new tasks for CPU
dim. 15 janv. 2023 11:11:59 | SiDock@home | Scheduler request completed: got 1 new tasks
dim. 15 janv. 2023 11:11:59 | SiDock@home | Project requested delay of 21 seconds
dim. 15 janv. 2023 11:12:01 | SiDock@home | Started download of sidock_00520620.zip
dim. 15 janv. 2023 11:12:08 | SiDock@home | Finished download of sidock_00520620.zip

boinccmd --get_tasks | grep "WU name"
Can't get RPC password: /var/lib/boinc-client/gui_rpc_auth.cfg exists but can't be read.  See https://boinc.berkeley.edu/gui_rpc.php
Only operations not requiring authorization will be allowed.
   WU name: p2030.20200729.G51.24-04.06.C.b6s0g0.00000_1624
   WU name: p2030.20200805.G47.71-03.32.N.b1s0g0.00000_2177
   WU name: p2030.20200801.G52.94-03.85.C.b2s0g0.00000_3459
   WU name: p2030.20200805.G47.71-03.32.N.b3s0g0.00000_3194
   WU name: corona_Sprot_delta_v1_RM_sidock_00520600_r2_s1000.0
   WU name: corona_Sprot_delta_v1_RM_sidock_00520594_r1_s1000.0
   WU name: corona_Sprot_delta_v1_RM_sidock_00520620_r1_s1000.0

Thank you

boinccmd shows that you computer got 3 tasks from SiDock@home:

...
   WU name: corona_Sprot_delta_v1_RM_sidock_00520600_r2_s1000.0
   WU name: corona_Sprot_delta_v1_RM_sidock_00520594_r1_s1000.0
   WU name: corona_Sprot_delta_v1_RM_sidock_00520620_r1_s1000.0
...

And this tasks are displayed on web page. Maybe BOINC Manager was switched to only active tasks displaying?

I am in advanced view, I should see all the tasks
Especially since in the meantime, a task from another project has started...

I need to reboot the Raspberry Pi, let me finish the current tasks and I'll see if it solves the problem.

Good point, tasks run but only appear when they are started !

I don't no why only active tasks displaying.

Thank You hoarfrost

I had been running SiDock on one of my laptops (NOT this computer) but inadvertently removed it. Now I cannot find it in the list to add it back as a project. How can I do that?

---

I had been running SiDock on one of my laptops (NOT this computer) but inadvertently removed it. Now I cannot find it in the list to add it back as a project. How can I do that?

In the Boinc Manager go to add project and delete the website address in the box and type in sidock.com/sidock/ and it should bring you to the log in page.

Easier said than done...I ass-u-me that within the BOINC Manager I need to select BAM! Seems as though I registered for this a while back but have never used it. The password isn't what I thought it would be and I cannot find any place to change it. Need help with that before I can restore SiDock! Thanks in advance!

When I try to do it from "Tools>Add Project" directly I get a message that "The URL you supplied is not that of a BOINC-based project".

You are trying to specify URL https://www.sidock.si/sidock/ or other?

You are trying to specify URL https://www.sidock.si/sidock/ or other?

I can't join the project on my Android tablet with that URL. The agreement screen won't show up.

See my post here:
https://www.sidock.si/sidock/forum_thread.php?id=228&postid=1810#1810

And this tasks are displayed on web page. Maybe BOINC Manager was switched to only active tasks displaying?

You were right, that was the "problem", I didn't know you could do that ...

Thank you and sorry for the inconvenience hoarfrost.

No worries. It is much better than real problem! :)

Copied it from the post above. Tried again and got a "Failed to add... Try again later" message.

Copied it from the post above. Tried again and got a "Failed to add... Try again later" message.

Earlier some participants faced problem like this due to expiration of certificates included into local ca-bundle.crt file. Can you find this file and replace it to new version if it not latest?
Other option - installing new version of BOINC.

When I try to do it from "Tools>Add Project" directly I get a message that "The URL you supplied is not that of a BOINC-based project".

It should add JUST http:\\ to the front of what you typed if so leave it there and try again and it should connect